Offshore Energy
  • Fossil Energy
  • Subsea
  • Alternative Fuels
  • Hydrogen
  • Marine Energy
  • More news
JobsNewsletter
Offshore Energy logo
Topics
  • Fossil Energy
  • Subsea
  • Alternative Fuels
  • Hydrogen
  • Marine Energy
Network
  • Offshore Energy
  • Offshore Wind
  • NavalToday
  • Dredging Today
Company
  • Advertising
  • Newsletter
  • Jobs
  • Report your news
  • Privacy

© 2026 Navingo. All rights reserved.

Home›Fossil Energy›Regulator puts the breaks on Noble rig’s drilling gig off Australia to prevent ‘major accident with serious injury’
Fossil Energy

December 1, 2022 · about 3 years ago

Regulator puts the breaks on Noble rig’s drilling gig off Australia to prevent ‘major accident with serious injury’

NOPSEMA has put a stop to Santos’ drilling ops on a gas field off Australia by issuing a prohibition notice for the Noble-owned jack-up rig.

3 minutes read
  • LinkedIn
  • X
  • Email
Regular puts the breaks on Noble rig’s drilling gig off Australia to prevent ‘major accident with serious injury’
Noble Tom Prosser rig; Source: Carnarvon

Australia’s regulator, the National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA) has put a stop to Santos’ drilling operations on a gas field off Western Australia by issuing a prohibition notice for the Noble-owned jack-up rig, hired for this assignment, on the grounds of well control equipment being “unfit for service.”

The Australian watchdog ordered Santos’ drilling contractor Noble to halt drilling activities on the Spartan gas field with the Noble Tom Prosser harsh environment jack-up rig until well control system issues are rectified to “remove the immediate threat to the health or safety of a person.” NOPSEMA’s inspector outlined that the activity, which could present “an immediate threat to health or safety of a person,” would arise from “drilling ahead into potentially pressured zones of the Santos’ Spartan-2 well with well control equipment that is unfit for service.”

The regulator explains that this activity might cause an immediate threat to the health or safety of a person because periodic maintenance and inspection of well control equipment has not been conducted in line with the facility operator maintenance system as per commitments in the Noble Tom Prosser facility safety case, and as required by the relevant equipment codes and standards such as API STD 53 and API SPEC 16 D.

Furthermore, several non-conformities were identified in this case including the BOP control hoses having damaged outer sheaths compromising the fire rating integrity of the hoses as required by API SPEC 16D while records for maintenance activities show that inspection and maintenance conducted on this safety critical equipment were not appropriate.

The offshore safety watchdog highlights that this also raises concerns regarding competency and quality of maintenance on other well-control equipment at the facility. Additionally, the integrity of BOP control hoses has not been “adequately demonstrated.”

Bearing this in mind, NOPSEMA concludes that the well control equipment may fail in emergency scenarios during drilling operations, resulting in “a potential major accident event with a serious injury to workers.” Therefore, Noble was directed to ensure all well control equipment was inspected, rectified, maintained and certified as fit for use in accordance with standards referenced in the Noble Tom Prosser facility safety case such as API Standard 53.

In addition, Noble was told to ensure BOP control hoses were fit for purpose in accordance with API SPEC 16 D section 4.3.4.2 piping systems whereby the standard requires:

“All rigid or flexible lines between the control system and BOP stack shall be flame retardant, including end connections, and shall have a rated working pressure at least equal to the rated working pressure of the system or subsystem in which the piping is installed. All control system interconnect piping, tubing, linkages, etc., should be protected from damage from drilling operations, drilling equipment movement and day-to-day personnel operations.”

Santos’ Spartan gas field, which is part of the Varanus Island Hub , is expected to be developed as a subsea tie-back to the John Brookes wellhead platform (WHP) via a single flexible flowline and umbilical. Development activities at the field entail the drilling of the Spartan well, installation of subsea equipment and pre-commissioning activities to connect the new well to the existing John Brookes WHP via a new flexible subsea flowline.

Drilling activities were expected to take approximately 42 days, while subsea installation and pre-commissioning activities would take approximately 25 days.

Regarding the John Brookes platform, it is worth noting that Santos shut down this platform along with a subsea pipeline earlier this week, after finding “a small gas leak” in a subsea flange on the main gas trunkline from the John Brookes platform to the Varanus Island gas processing facilities.

Related Articles

Fossil Energy

Offshore platform shut in following gas leak

3 min read

Located in the North West Shelf (NWS) off Western Australia, the Varanus Hub encompasses the John Brookes, Spartan and Greater East Spar (GES) gas fields. Subsea pipelines transport the oil and gas production from these fields to the Varanus Island Hub.

Reach the Offshore Energy industry in one go!

Offshore Energy is read by thousands of professionals every day.

Increase your visibility with banners, tell your story with a branded article, and showcase your expertise with a full-page company profile in our business directory.

CONTACT

Follow Offshore Energy on:

Filed under

Fossil EnergyOil & GasRigsAuthorities & GovernmentBusiness & FinanceBusiness Developments & ProjectsExploration & ProductionOperations & MaintenanceProject & TendersRegulation & PolicyRules & RegulationSafety

Home of Energy Transition

Join thousands of industry professionals who start their day with our newsletter.

Trending Now

  1. 1SED Energy Holdings and Ventura Offshore to unite into one
  2. 2New Boskalis rock installation vessel starts work offshore Poland
  3. 321 companies apply for Norway’s new oil & gas exploration areas
  4. 4Spanish shipyard launches its largest-ever vessel, built for Østensjø Rederi

Home of Energy Transition

Join thousands of industry professionals who start their day with our newsletter.

Subscribe free